All loudspeaker measurements are performed independently at the National Research Council of Canada. All measurement data and graphical information displayed below are the property of the SoundStage! Network and Schneider Publishing Inc. Reproduction in any format is not permitted.
Setup
Microphone measuring position: between tweeter and midrange-woofer
Grille: on
High Frequency Energy Control setting (except where noted): “0”
Frequency response and voltage sensitivity
Voltage sensitivity: 84.77dB (averaged 300Hz-3kHz on Listening Window, 2.83V/1m)
Chart A: 20Hz - 20kHz (measured @ 2m, plotted @ 1m)
Top curve: on-axis response
Middle curve: 15 degrees off-axis response
Bottom curve: 30 degrees off-axis response
Chart B: 20Hz - 20kHz (measured @ 2m, plotted @ 1m)
Top curve: 45 degrees off-axis response
Middle curve: 60 degrees off-axis response
Bottom curve: 75 degrees off-axis response
Chart C: 20Hz - 20kHz (measured @ 2m, plotted @ 1m)
Additional measurement to show effect of High Frequency Energy Control switch on back panel
(Line up at 10kHz)
Top curve: + setting
Middle curve: 0 setting
Bottom curve: - setting
Listening window
20Hz - 20kHz (measured @ 2m, plotted @ 1m)
Response curve is an average of five measurements: on-axis, 15 degrees left and right off-axis, 15 degrees up and down off-axis
Total harmonic distortion + noise
Chart A: @ 90dB, 50Hz - 10kHz (measured @ 2m)
Top curve: frequency response @ 90dB SPL
Bottom curve: THD+N @ 90dB (50Hz - 10kHz)
Deviation from linearity
Chart A: Difference @ 90dB from 70dB, 50Hz - 20kHz (measured @ 2m)
Impedance magnitude variation
Vertical axis: impedance
Horizontal axis: frequency
Electrical phase
Vertical axis: phase
Horizontal axis: frequency